Shear Webs and LE Sheeting

After both spars have glued, the next step is to fit the shearwebs. This is a bit fiddly as each one has to be cut and fitted individually and then they all have to be glued in position and the wing put back in the jig.




Shearweb fitting in progress. Had to take a break to eat before I got into trouble with the Boss.





Finished shearweb. The marks are to remind me which way round to fit each one as they all have a slight taper.






Fitting the underside leading edge sheeting. Again the wing has to weighted down in the jig.