Next job is to glue to the fin to the fuselage.
Wednesday, 24 February 2010
Attaching the Fin
After a break to prepare a Cyril for the F3B season it's back to the Phase 5.
Next job is to glue to the fin to the fuselage.

Next job is to glue to the fin to the fuselage.
Sunday, 7 February 2010
Building the Fin
Friday, 29 January 2010
Tailplanes & Bellcrank
Wednesday, 27 January 2010
More Fuselage
Tuesday, 26 January 2010
Top Sheeting, Nose and Hatch
Sunday, 24 January 2010
Sheeting the Bottom of the Fuselage
Friday, 22 January 2010
Joining the Fuselage Sides
The next step is to join the fuselage sides.

The fuselage is joined inverted on the bench. The rear is supported off the bench to allow room for F2 and clamped at the front.

F2 is held in place by the pressure from the clamp at the front. A datum line is drawn drawn on the board to ensure the fuselage doesn't resemble a banana.
The fuselage is joined inverted on the bench. The rear is supported off the bench to allow room for F2 and clamped at the front.
F2 is held in place by the pressure from the clamp at the front. A datum line is drawn drawn on the board to ensure the fuselage doesn't resemble a banana.
Subscribe to:
Posts (Atom)